Loading... Please wait...

Our Newsletter


20A Brushless Motor ESC for Multirotors(3A BEC, 2-3 cell Li-Poly)

  • Image 1
  • Image 2
  • Image 3
RRP:
$35.00
Your Price:
$16.95 (You save $18.05)
SKU:
M20A
Shipping:
Calculated at checkout
Quantity:


Product Description

20A Brushless ESC Programming Guide

Feature   

  • Design for Multirotors
  • Low resistance
  • 3A BEC
  • 8khz PWM
  • For 4-10 NiCd/NiMH cells, 2-3 Li-Poly Cells
  • 30A Max
  • User programmable brake
  • User programmable low-voltage cutoff type (Lipo or NiCD/NiMH)
  • Throttle range self-adjusting
  • Soft start ramp up
  • Auto motor cutoff with reset
  • Safe power arming program ensures motor will not run accidentally after turn on
  • Low torque start
  • Auto shut down when signal is lost
  • Max RPM: 40,000 RPM with 14 pole motor


Note: If using 5 servos with 3-cell Li-Poly batteries, you will need a 4.8V receiver pack or an external
switching BEC to provide power to your receiver.

Never exceed the recommended battery voltage listed on the package. Do not use a separate battery
supply with this controller. Never disconnect the battery supply when the motor is running. We strongly
suggest that you use an overload fuse in the battery circuit. For example, a motor will run at 4 amps
therefore a 5 amp speed controller is adequate. If the motor is stalled or stopped, with the power on,
then it will draw 15 to 20 amps and burn out the speed controller. An overload fuse can prevent this
type of damage. Also, the BEC provides a regulated power supply to the receiver. Usually about .5
amps. A stalled servo can draw 2 or 3 amps and damage the BEC which in turn can cause damage to
the receiver

 

Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

You Recently Viewed...