HiModel 860mAh 7.4V 20C Lithium Polymer Battery Pack W/ balancer TAP
Specifications:
1) Never let the batteries run down lower than 70%. Once the battery is low, the chemical reaction happens, the
resistance goes up, and the battery deteriorates very fast.
2) Never store the batteries in full charge. Battery will not discharge because it not active.
3) Never store the batteries lower than 3.7V/cell. Battery cannot be charged back when the voltage is too low.
4) Store the batteries in half charged, between 3.8-3.9v
Complete Guide to Lithium Polymer Batteries and LiPo Failure Reports
- Size: 64 x 30 x 16.4(mm) / 2.54 x 1.17 x 0.65 inch
- Weight:57g / 2.02oz
- Voltage: 7.4V
- Capacity:860mAh
- Combination: 2S1P
- Continuous discharging: 20C ( this battery can safely run at 25C continuously according to real test)
- Burst discharging rate: 30C
- Extreme low internal resistance with balancing tap.
1) Never let the batteries run down lower than 70%. Once the battery is low, the chemical reaction happens, the
resistance goes up, and the battery deteriorates very fast.
2) Never store the batteries in full charge. Battery will not discharge because it not active.
3) Never store the batteries lower than 3.7V/cell. Battery cannot be charged back when the voltage is too low.
4) Store the batteries in half charged, between 3.8-3.9v
Complete Guide to Lithium Polymer Batteries and LiPo Failure Reports
| |||||||||||||||||||||||||||||||||||||||||||||||||||||
Free Shipping on orders over $100.00
 | |  | |  | |  | |  | |  | |  |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |