Radio Control (RC) Airplanes, Helicopters,components-Motors & ESCs

Auto-detects 2 or 3 cell Li-Poly pack and adjusts cut-off voltage
Beeps number of cells at startup
Auto-learns throttle range
Auto-timing
Safe start
1A BEC - supports 3 servos
Flexible silicone wire

Note: Never exceed the recommended battery voltage listed on the package. Do not use a separate battery supply
with this controller. Never disconnect the battery supply when the motor is running. We strongly suggest that you use
an overload fuse in the battery circuit. For example, a motor will run at 4 amps therefore a 5 amp speed controller is
adequate. If the motor is stalled or stopped, with the power on, then it will draw 15 to 20 amps and burn out the speed
controller. An overload fuse can prevent this type of damage. Also, the BEC provides a regulated power supply to the
receiver. Usually about 0.5 amps. A stalled servo can draw 2 or 3 amps and damage the BEC which in turn can cause
damage to the receiver.

10A Brushless Motor Speed Controller ESC

Free Shipping on orders over $100.00