Note: This ESC has no built-in battery eliminator circuit (BEC). You will need a 4.8V receiver pack or an
external switching BEC to provide power to your receiver.

  • Constant current 60A Max 80A  <10s
  • Li-Poly 2-7 cells Ni-MH 6-20 cells
  • Low resistant 0.0014 ohms;
  • Dynamic braking
  • BEC: N/A  Click here to buy a 3A UBEC for the receiver
  • Auto shut down when lose signal
  • Slow down at 3.0V per cell Lipo, Cut-off at 2.9V per cell Lipo 0.8V Nimh
User programming options:
  1. Battery Setting
  2. Throttle Range
  3. Brake Setting:
  4. Direction and Cutoff Type
  5. Timing Mode Setting: 1º /7º /15º/30º
  6. PWM  Setting: 8K/16K



Manual
60A Brushless Motor Speed Controller ESC
$24.95
Free Shipping on orders over $100.00