Loading... Please wait...

Our Newsletter

50A Brushless Motor ESC for planes(3A BEC, 2-3 cell Li-Poly)

  • 50A Brushless Speed Controller ESC
  • 50A Brushless Speed Controller ESC
Your Price:
$23.95 (You save $11.05)
Calculated at checkout

Product Description

50A Brushless ESC Programming Guide





  • Low resistance
  • 3A BEC built-in
  • Soft start ramp up /Low torque start
  • User programmable Governor Mode
  • User programmable low-voltage cutoff type (Lipo or NiCd/NiMH)
  • Throttle range self-adjusting
  • 8khz/16khz PWM
  • For 5-10 NiCd/NiMH cells, 2-3 Li-Poly Cells
  • 50A Max on 3 Li-Poly
  • Auto motor cutoff with reset
  • Auto shut down when signal is lost
  • Max RPM: 20,000 RPM with 14 pole motor
  • Max RPM: 35,000 RPM with 8 pole motor

Note: If using 5 servos with 3-cell Li-Poly batteries, you will need a 4.8V receiver pack or an external


switching BEC to provide power to your receiver.

Never exceed the recommended battery voltage listed on the package. Do not use a separate battery
supply with this controller. Never disconnect the battery supply when the motor is running. We strongly
suggest that you use an overload fuse in the battery circuit. For example, a motor will run at 4 amps
therefore a 5 amp speed controller is adequate. If the motor is stalled or stopped, with the power on,
then it will draw 15 to 20 amps and burn out the speed controller. An overload fuse can prevent this
type of damage. Also, the BEC provides a regulated power supply to the receiver. Usually about .5
amps. A stalled servo can draw 2 or 3 amps and damage the BEC which in turn can cause damage to
the receiver.



Find Similar Products by Category

Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

You Recently Viewed...