Only one bind procedure is required on a new receiver. Repetitive binding provides no extra security. Always remember to remove the binding harness after successful bind is completed.
Posted by Jerry on 23rd May 2016
Great price!! Works perfectly!
Posted by Dik Lang on 18th Apr 2015
These are unbelievably good! I buy only rchotdeals receivers, never had a brownout problem. They are quality full range receivers that are unbeatable! I have over a dozen, zero problems.
Posted by Ian on 6th Sep 2014
Nicely made. Side pins and Light. Great for Foamies and any scratch builds. Will bind to New DX6 which is awesome. I highly recommend.
Posted by Unknown on 24th May 2014
Had no problems binding to JR X8303 and Spektrum DX6i. Bound to a Orange RX DSM 2 Module (Hobby King) in my JR 8103 after getting the configuration right in the JR transmitter for the transmission mode. Compact and lightweight, no problems with performance.
Posted by Don Farmer on 1st Jan 2014
The receiver works great and for you who are having trouble binding the receiver from the top looking down at the pin put the tag on starting on the left side. First pin is batt and also the bind plug . Put bind plug in batt and use the next pin for your power to receiver. After bind pull the bind plug. Now use it as normal
Posted by Jim B. on 15th Jul 2013
I have oredred three of these and they work fine. The price is good. Have one in a P51, and one in a Flylite.
Posted by J. Weidman on 6th Apr 2013
I buy a lot of radio equipment and look for the best value for my money. This receiver is one of the best buys I have made in awhile. Once I figured out the bind feature and the pins it was up and functioning in seconds. Terrific range and rock solid operation in every plane and situation I put it in. I would highly recommend it to anyone looking for a very small, light weight receiver for any small plane.
Posted by John on 29th Mar 2013
Probably is a great receiver if there was a bind plug position marked. There is a printed sticker, not applied to the receiver which has everything listed except bind. I tried both ends of the connector block without any luck. Has someone got it to bind to a DSM 2 receiver?
If I can get to bind mode, I think it will work. Tried with servos to see if it has been bonded already and no response.
Any help would be appreciated.